>visionsystems.de/NetCom 113 (666.html)   Features Can control 1 x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet) LAN interface10BaseT/100BaseTx Ethernet Driver automatically finds NetCom devices in the network Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP Automatic mode switching between Driver and Raw Mode Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS supports ART (Automatic Receive Transmit control) RS232/422/485 interface selectable by Switches     Zoom in Picture NetCom 113 Quick Link: | Features | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | Download | |   Overview NetCom 113 is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 113 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.   Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control   Hardware Processor ARM 7 TDMI 50MHz I/O controller 16C550C or compatible Memory 8MB SDRAM, 1 MB Flash Connector type RJ45 for LAN, DSUB 9 female for serial Port >Back to top         Interface LAN interface Auto-detecting 10BaseT/100BaseTx Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS Serial interface RS232/422/485 switchable No. of port 1, Speed up to 460Kbps Available Modes RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo Signals RS232 TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422 Tx+/-, Rx+/-, GND RS485 2 wire Data+/-, GND RS485 4 wire Tx+/-, Rx+/-, GND RS485 Data control Controlled by ART (Automatic Receive Transmit control) or RTS >Back to top         Performance Speed up to 460Kbps Parity None, even, odd, space, mark Data bits 5, 6, 7, 8 Stop bits 1, 1.5, 2 IRQ None I/O address None >Back to top         Operating Modes Driver mode VScom Driver for Windows NT 4.0, 2000, XP and 2003, Vista. Driver Mode creates virtual Com port. TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections. TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections. TCP Advanced Settings Special settings for user-defined modes UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data. Null Modem Tunnel Connecting two NetCom used as virtual null modem cable. IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers. Windows "INF"-Driver provided for installation. Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems >Back to top         Power and Environment Power requirements 9 - 30V DC, 200mA @ 12V Power supply Adapter 9V, 500mA Dimension  73×115×27 mm³ (W×L×H) 101×121×27 mm³ with DB9 connector and ears Operating Temp 0°C - 60°C Storage Temp -20°C - 85°C Case SECC sheet metal (1mm) Weight 0.2kg >Back to top         Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP SNMP special VScom MIB included ART Automatic Receive Transmit control for RS485 DNS Domain Name Server support Serial interface Serial Interface configurable with external switch Firewall Special precautions for Firewall environments Firmware Firmware update over WEB Browser, Telnet, ComPort LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed >Back to top         Security Password access Every capabilities of configuration use the same password including SNMP V3 >Back to top         Ordering Information Art.No 666 Product Name NetCom 113 DIN Rail Packing list NetCom 113 Power supply adapter 9V, 500mA Serial Null-Modem adapter CD-ROM with Driver and configuration software Printed Quick Installation Guide DIN Rail KIT >Back to top         Optional Accessories DK 35A DIN-Rail mounting kit >Back to top       Download   Windows 7, Vista  (Driver Set and Manager Program (version 1.5.9.3   December 10 2007)) Windows 7 Beta  (Driver Set and Manager Program version 1.5.11.0 July 18 2010) Windows XP/2003  (Driver Set and Manager Program (WHQL version 1.5.9.3   December 10 2007)) Windows XP/2003 64 bit  (Driver Set and Manager Program (version 1.5.9.3   December 10 2007)) Windows 2000  (Driver Set and Manager Program (version 1.5.9.3   December 10 2007)) Windows NT 4.0  (Driver Set and Manager Program (version 1.5.9.3   December 10 2007)) Linux  (Fixed tty driver, beta (version 1.00.03 07/17/2004)) IP Modem  (Windows INF-file for IP Modem function (May 26  2005)) HowTo  (Background Information NetCom Series) Network tools  (SNMP tools plus Ethereal/Wireshark plugin) Anleitung  (Installationsanleitung Windows 2000/XP/2003/Vista (Deutsch, PDF)) Manual  (Product Manual (PDF, June 2010)) Firmware  (Firmware version 2.6.2 (June 11 2010)) >Back to top