>visionsystems.de/NetCom Mini P (659.html)   Features Can control 1 x RS232 device located virtually anywhere (via Ethernet or Internet) LAN interface 10BaseT/100BaseTx Ethernet UPnP Manager automatically finds NetCom Mini devices in the network Configuration over WEB Browser Support TCP/IP, UDP, DHCP/Auto-IP, ICMP, DNS, UPNP, HTTP, RFC2217 Small plastic case, lightweight       NetCom Mini P Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Ordering Information | Optional Accessories | Download | |   More Pictures Klick on the thumbnails to enlarge them … >Back to top         Overview The NetCom Mini P is an easy-to-use network-based serial device server for connecting one RS232 device like CNC, PLC, weighting scale, scanner and other directly to the 10/100Mbps Ethernet network running TCP/IP. The small and lightweight plastic case allows to mount it by the connection cables. NetCom Mini P is configured over Web Browser. Windows detects NetCom Mini P using UPNP function, the NetCom UPnP Manager also detects them in the LAN using UPNP. This UPnP Manager will also open the Web Browser to configure the NetCom Mini P. The NetCom Mini P serves as a transparent serial channel without operating system and distance limitation. The serial port redirection uses the protocol known as RFC2217. This is well known and tested for many use cases, so NetCom Mini P is a possible extension for existing installations. The NetCom UPnP Manager also installs devices communicating via the Internet.   Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control   Hardware Processor ARM 7 SoC I/O controller Embedded UART Connector type RJ45 for LAN, DSUB 9 male for serial Port >Back to top         Interface LAN interface Auto-detecting 10BaseT/100BaseTx Protocols TCP/IP, UDP, DHCP/Auto-IP, ICMP, DNS, HTTP, UPNP, RFC2217 Serial interface RS232 No. of port 1, Speed up to 115kbps Available Modes RS232 full duplex Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND >Back to top         Performance Speed up to 115kbps Parity None, even, odd, space, mark Data bits 5, 6, 7, 8 Stop bits 1, 1.5, 2 IRQ None I/O address None >Back to top         Operating Modes Driver Mode VScom Driver for Windows XP to 7, Server 2003 to 2008 R2, both x86 and x64 Editions. The driver creates a virtual Com Port, and takes advantage of certain VScom extensions to RFC2217. The UPnP Manager detects NetCom Mini Servers, and permits to install them as virtual Com Ports in Windows. The Manager also installs servers connected to via Internet. TCP Raw Server Raw data transfer over TCP/IP Telnet RFC2217, Com Port Control Option This extension of Telnet is used by the Windows Driver. There are several alternative drivers and libraries available to support this protocol. Some may be available for special operating systems, e.g. Linux may use the cyclades-serial-client. >Back to top         Power and Environment Power requirements 5V DC, 150mA (200mA initial peak) Power supply Adapter 5V DC, 2A Dimension 45×82×26 mm³ (W×L×H) 45×85×26 mm³ with DB9 connector Operating Temp 0°C - 70°C Storage Temp −20°C - 90°C Case Molded plastic Weight 70g >Back to top         Special Features Installation NetCom UPnP Manager automatically finds NetCom Mini devices in the network Detection Windows detects configured devices using UPNP Configuration Configuration over WEB Browser DNS Domain Name Server support Firmware Firmware update over Manager Software LEDs LEDs for TxD, RxD, LAN Link, LAN Speed >Back to top         Ordering Information Art.No 659 Product Name NetCom Mini P Packing list NetCom Mini P Power supply adapter 5V DC, 2A CD-ROM with Driver and configuration software Printed Quick Installation Guide >Back to top         Optional Accessories 9PF-9PF Null-Modem adapter converts DB9 male to DB9 female VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.) >Back to top       Download   Windows XP to 7 Server 2003 to 2008 R2 x86 + x64 Editions  (Driver 1.0.32 and Manager 1.1.2 (Jun 15 2011)) >Back to top